| TINI390 power requirements
|
How much power TINI needs and how to supply it.
Applies to ALL sockets boards as well as your own use of TINI. |
| Add a 7805 regulator
to e10 |
How to add a 7805 regulator to a Dallas e10 socket
board, with notes and photos, from Douglas Braun. |
| 1-Wire network
pinout |
Here is the actual, true pinout for 1-Wire in
an RJ12, as used on TINI sockets and many 1-Wire boards. |
| TINI signal loading |
What we have learned about TINI address and data
bus loading. |
| TINI JavaKit problems
|
"No response from TINI" in JavaKit?
This can be frustrating, this page may help a little bit. Also
see the "erased TINI" areas below. |
| PC Serial Port
Problems |
If JavaKit checks out (here)
then the problem may be your PC serial port is marginal (many
notebooks are). |
| Restoring an erased TINI |
Restoring a completely erased TINI. I "accidentally"
erased all sectors of flash in several TINIs. Here's how I restored
them. |
| Saga of an erased TINI |
A customer sent us their erased TINI and STEP+
board, with AT29C010 flash. Here's what we found. |
Erasing TINI's IP Configuration
 |
TINI's IP configuration is saved in NVRAM and optionally
also in flash. Here's how to erase it so that you can assign different
IP settings. |
