|
|
|
|
|
PowerAdap12V-univ
|
- Switching adapter, 110-240 VAC input
- Mains plugs for UK, NZ/AU, EU/Germany and North America.
note: the included EU/Germany adapter is not in the photo!
- Use with all our development and socket boards
- 5.5 x 2.5 mm power jack, center positive
- 12VDC +/- 5%, 1.3A regulated output
- power output rated at 0-40 deg C,
derates linearly to 50% at 70 deg C.
- UL, CE, GS listed, RoHS compliant
- meets the radiated and conducted emission
requirements for FCC PART 15 CLASS B,
EN55022 CLASS B
|
|
|
|
|
|
|
|
|
|
|
|
|
|
JSimmProto-RoHS
|
JSimm Proto board 1 -- RoHS Compliant -- 2 inch tall bare board for JSimm and simmstick prototyping both through-hole and SMT. Works with all SIMM30 sockets such as TILT.Pro, JSimm backplane, and all SimmStick systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Book-EmbeddedEthernet
|
Embedded Ethernet and Internet Complete by Jan Axelson. A great book for use with TStik or any embedded ethernet system.
|
$50.00 On Sale! $35.00
|
|
|
|
|
|
|
|
|
|
|
|
|
CAN DB9 adapter cable
|
- 5x2 100-mil receptacle to standard CAN Open DB9M
- Fits TILT and many other CAN vendor's boards
- 6-inch/150mm ribbon cable
- metal shell DB9M connector with 4-40 threads
- CAN Open industry standard pinout:
- no connection
- 2 CAN-
- GND
- no connection
- GND
- GND (VCan GND)
- CAN+
- no connection
- Vcan+
|
$8.00
|
|
|
|
|
|
|
|
|
|
|
|
|
JCX.MPC.IOD16A3
|
50x100mm I2C IO board with 16 digital IOs (PCA9555) and 3 analog inputs (ADS112 16-bit ADC). Tagging memory EEPROM, local voltage regulator, and easy to use connectors. Plugs into TILT.Pro using the included 5x2 ribbon cable. Also usable with other I2C systems. If you want to add a lot of digital I/O and some high-res analog I/O to a system, this is how to do it. Up to four may be used on one I2C system by setting the I2C address.
|
$99.00 On Sale! $75.00
|
|
|
|
|
|
|
|
