Serial/UART Adapters

	Serial Adapters
Serial-interface cables, connectors and adapters. (Most Systronix products use a compact 2mm header for serial expansion.)

1 2

2mm ribbon cable - 5x2, 300mm

12-inch (300 mm) 10-conductor ribbon cable
2mm 5x2 polarized receptacles on each end
Just the cable - no DB9 serial adapter
Use to connect 2 mm serial adapters to a circuit board connector such as on JStik, TILT, SaJE, TrackBot, etc.
RoHS compliant

Quantity	1 - 9	10+
Price	$9.00	$8.00

2mm ribbon cable - 5x2, 400mm

15.7-inch (400 mm) 10-conductor ribbon cable
2mm 5x2 polarized receptacles on each end
Just the cable - no DB9 serial adapter
Use to connect 2 mm serial adapters to a circuit board connector such as on JStik, TILT, SaJE, TrackBot, etc.
RoHS compliant

Quantity	1 - 9	10+
Price	$10.00	$9.00

Vex to JCX serial cable

Plugs into the Vex controller RJ12 socket and fans out to three .025"-square receptacles for Ground, and TTL-level serial TXD and RXD. These plug onto a JStamp Dev Station pins, the pins along the bottom of the JCX.JStamp controller, or other .025-square pins. The cable is about twelve inches long. You can also use this with your own hardware or other controllers which have TTL-level asynchronous serial signals. Don't use with RS232 levels (which would damage the Vex controller!).

$20.00

1 2

Credit Card Online Payments

This store uses SSL in the checkout portion of your transaction.
We value your privacy and never share your contact information with other companies.