|
|
|
|
|
|
JSimm.Backplane-R2-nonRoHS
|
"6-slot backplane, mountable on the VEX system"
|
$89.00
|
|
|
|
|
|
|
|
|
|
|
|
|
JCX.DIO
|
JCX Digital Input/Output Board. Works with SIMM30-equipped boards such as TILT, JStik w/backplane, JStamp Development Station, or compatible SimmStick systems. Uses SPI from thost controller. DIO has 24 bits rugged parallel I/O, each with open drain output. Each bit is also an input. The 25x2 header plugs into Opto-22 style I/O racks for industrial use. Or fan them out to an LCD, keypad, whatever...
|
$125.00
|
|
|
|
|
|
|
|
|
|
|
|
|
JSimmProto-RoHS
|
JSimm Proto board 1 -- RoHS Compliant -- 2 inch tall bare board for JSimm and simmstick prototyping both through-hole and SMT. Works with all SIMM30 sockets such as TILT.Pro, JSimm backplane, and all SimmStick systems.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vex to JCX serial cable
|
Plugs into the Vex controller RJ12 socket and fans out to three .025"-square receptacles for Ground, and TTL-level serial TXD and RXD. These plug onto a JStamp Dev Station pins, the pins along the bottom of the JCX.JStamp controller, or other .025-square pins. The cable is about twelve inches long. You can also use this with your own hardware or other controllers which have TTL-level asynchronous serial signals. Don't use with RS232 levels (which would damage the Vex controller!).
|
$20.00
|
|
|
|
|
|
|
|
