|
|
|
|
|
JCX.DIO
|
JCX Digital Input/Output Board. Works with SIMM30-equipped boards such as TILT, JStik w/backplane, JStamp Development Station, or compatible SimmStick systems. Uses SPI from thost controller. DIO has 24 bits rugged parallel I/O, each with open drain output. Each bit is also an input. The 25x2 header plugs into Opto-22 style I/O racks for industrial use. Or fan them out to an LCD, keypad, whatever...
|
$125.00
|
|
|
|
|
|
|
|
|
|
|
|
|
JSQS
|
JSimm Quad Serial has four UARTs on board. All four JSQS UARTs can be RS232, and all are capable of 115 kbaud. One UART per JSQS can be RS485, and one can be IrDA. JStik will support up to four JSQS boards at one time, for up to 14 UARTS (Twelve on JSQS boards plus the two on JStik).
- This is just the OEM JSQS board. If you are new to JSQS we recommend you start with a JSQS Dev Kit
- Please order the HSIO cable (to connect to JStik) separately, depending on how many JSQS you will connect to one JStik.
- Please order serial adapters (DCE, DTE, and IrDA) separately, to meet your needs.
Stock is very low - please contact us if you have special needs such as OEM quantities so that we can meet your requirements.
|
$189.00
|
|
|
|
|
|
|
|
|
|
|
|
|
JCX.MPC.IOD16A3
|
50x100mm I2C IO board with 16 digital IOs (PCA9555) and 3 analog inputs (ADS112 16-bit ADC). Tagging memory EEPROM, local voltage regulator, and easy to use connectors. Plugs into TILT.Pro using the included 5x2 ribbon cable. Also usable with other I2C systems. If you want to add a lot of digital I/O and some high-res analog I/O to a system, this is how to do it. Up to four may be used on one I2C system by setting the I2C address.
|
$99.00 On Sale! $75.00
|
|
|
|
|
|
|
|
|
|
|
|
|
JSimmProto-RoHS
|
JSimm Proto board 1 -- RoHS Compliant -- 2 inch tall bare board for JSimm and simmstick prototyping both through-hole and SMT. Works with all SIMM30 sockets such as TILT.Pro, JSimm backplane, and all SimmStick systems.
|
|
|
|
|
|
|
|
|
